Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA 5510 remote management via vpn client

Hi,

I need to manage an ASA 5510 by remote using a Cisco vpn client.

I have a 7.2(1) an it's running. I logged into the vpn and ssh I can connect the inside IP of the ASA. I cannot ping the inside IP!

Trying the same scenario on another 5510 with ASA 7.2(4) doesn't work.

Any help?

Regards, Celio

  • Firewalling
2 REPLIES

Re: ASA 5510 remote management via vpn client

Celio,

Does your config have management-access statement anywhere?

in order to manage the ASA via VPN tunnel you need management-access statement.

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/m.html#wp1987122

typical statement

asa(config)#management-access inside

if management0/0 is your only management interface defined by statement under the interface you may need

management-access management

try these and let us know if issues.

Regards

PLS rate any helpful posts

New Member

Re: ASA 5510 remote management via vpn client

Hi Jorge,

I tried different combinations of management-access.

Under 7.2(1) I have no such command and it works!

Under 7.2(4) I configured:

management-access inside

ssh RA-VPN-IP inside

and it works!

Thx for your help.

Celio

832
Views
4
Helpful
2
Replies
This widget could not be displayed.