I have two identical ASA 5510's and would like to create a tunnel between them so that I can replicate backup data. My old 281l's at each end could not handle the traffic. On my data center end I use 22.214.171.124 /17 and 126.96.36.199 /24 on the other end I use 188.8.131.52 /24 184.108.40.206 /24 and 220.127.116.11 /24. Can someone provide me the correct local network and remote network settings for both ends? My question is whether or the the ASA will get confused since the DR nets are in the /17 range of my datacenter. I use eigrp and some static routes, to route the traffic. Thanks.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...