Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASA 5510 - Upgrade Path from 7.0(5)

Dear All -

I have an ASA 5510 running 7.0(5).

I would like to upgrade to 7.2(2)22 - does anyone know if this is a recognized upgrade path?

I have read here (http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml) that I need to go to 7.1(x) first, but my understanding is that I only need to do that if I upgrade using ASDM as opposed to the command line.

I plan to use the CLI to perform the upgrade.

Thanks, any help much appreciated.

1 REPLY
Silver

Re: ASA 5510 - Upgrade Path from 7.0(5)

copy tftp disk0:

Same command is standard....

You sent that link it has also command line.

Follow that is standard.. that is no other standard way than that.

Regards,

Dharmesh Purohit

1072
Views
0
Helpful
1
Replies
CreatePlease to create content