Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

ASA 5510 with two different ISPs

Currently we have a T1 for data connected to a 1721 Router that is connected to an ASA 5510.  We would like to add a FIOS line for dedicated online backup.  Is it possible to connect the FIOS router to the ASA and route the IP from our backup server to use the FIOS line and everyone else continue to use the T1?  Thanks in advance for your help.

Everyone's tags (3)
3 REPLIES
Red

ASA 5510 with two different ISPs

Hi Michael,

If you are requirement is that when the T1 line goes down the traffic should be routed through the FIOS line, then you can do that through SLA monitoring on ASA, here's how:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

Let me know if this is what you were looking for.

Thanks,

Varun

Thanks, Varun Rao Security Team, Cisco TAC
New Member

ASA 5510 with two different ISPs

Thank you for the response.  What I am looking to do would be to have both the T1 and the FIOS lines connected to the ASA and active.  All trafic would use the T1 for internet except for the backup server that would use the FIOS line for internet.  I realise I could just connect the FIOS router to the backup server and use a differnet gateway assigned to the FIOS router but I wanted to take advnatage of the ASA if possible.  Thanks.

Red

ASA 5510 with two different ISPs

Can you let me know the code you are running on the ASA???

Varun

Thanks, Varun Rao Security Team, Cisco TAC
727
Views
0
Helpful
3
Replies
CreatePlease to create content