ASA 5512-X DHCP Backup ISP

[deyster94]

I installed a new ASA 5512-X over the weekend for a client.  Their backup ISP connection is DHCP based.  I need to use the 'dhcp client route track' command on the interface, but it is not available.  However according the all the documentation I am looking at and even the ASDM says it should be available. 

This is the version of ASA and ASDM they are running:

Cisco Adaptive Security Appliance Software Version 8.6(1)1

Device Manager Version 6.6(1)

I did upgrade to the latest ASA software, so has this command been removed?  If I do a '?' in the interface, there isn't a 'dchp' option. 

Any help would be appreciated.  I really don't want to tell them they need to get a static IP address to resolve this issue.

TIA,

Dan

[Jennifer Halim]

Looks like you are hitting bugID: CSCtq78280

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtq78280

Pls open a TAC case to get the fixed on version 8.6.1(x).

[deyster94]

Yup, that looks like what I am hitting.  I opened a TAC case already and am waiting to hear back from.