Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ASA 5520 boots to rommon #0> and doesn't fully load w/o typing boot

Hi, had to do a password recovery but must have typed something incorrect. Our ASA5520 now only boots to rommon #0> and we have to type "boot" to get it to fully load. Software version asa804-k8.bin.

Tried to go back to factory default, but still only boots to the rommon #0. Thanks, Chris.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: ASA 5520 boots to rommon #0> and doesn't fully load w/o typi

Chris

Sounds like your config register has been set to the wrong value. To set it back to default

no config-register

save and then reload your ASA -

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2121156

Jon

2 REPLIES
Hall of Fame Super Blue

Re: ASA 5520 boots to rommon #0> and doesn't fully load w/o typi

Chris

Sounds like your config register has been set to the wrong value. To set it back to default

no config-register

save and then reload your ASA -

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2121156

Jon

New Member

Re: ASA 5520 boots to rommon #0> and doesn't fully load w/o typi

Hi Jon,

Easy enough thank you for solving my problem. :)

5882
Views
0
Helpful
2
Replies
CreatePlease to create content