11-28-2007 10:40 AM - edited 03-11-2019 04:36 AM
I have ASA 5520
Cisco Systems Version (1.0(11)2) #0: Thu Jan 26 10:43:08 PST 2006
I was working on it and wrongly I use this comand < erase disk1: >
I tried to restart it and it can not boot.
it show this mesage during the booting
Booting system, please wait...
CISCO SYSTEMS
Embedded BIOS Version 1.0(11)2 01/25/06 13:21:26.17
Low Memory: 631 KB
High Memory: 512 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 2578 Host Bridge
00 01 00 8086 2579 PCI-to-PCI Bridge
00 03 00 8086 257B PCI-to-PCI Bridge
00 1C 00 8086 25AE PCI-to-PCI Bridge
00 1D 00 8086 25A9 Serial Bus 11
00 1D 01 8086 25AA Serial Bus 10
00 1D 04 8086 25AB System
00 1D 05 8086 25AC IRQ Controller
00 1D 07 8086 25AD Serial Bus 9
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 25A1 ISA Bridge
00 1F 02 8086 25A3 IDE Controller 11
00 1F 03 8086 25A4 Serial Bus 5
00 1F 05 8086 25A6 Audio 5
02 01 00 8086 1075 Ethernet 11
03 01 00 177D 0003 Encrypt/Decrypt 9
03 02 00 8086 1079 Ethernet 9
03 02 01 8086 1079 Ethernet 9
03 03 00 8086 1079 Ethernet 9
03 03 01 8086 1079 Ethernet 9
04 02 00 8086 1209 Ethernet 11
04 03 00 8086 1209 Ethernet 5
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(11)2) #0: Thu Jan 26 10:43:08 PST 2006
Platform ASA5520
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Launching BootLoader...
Default configuration file contains 1 entry.
Searching / for images t
Error 28: Selected item cannot fit into memory
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
Error 28: Selected item cannot fit into memory
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
Error 28: Selected item cannot fit into memory
unable to boot an image
Booting system, please wait..
Can you help me to solve the problem ?
Thanks
11-28-2007 12:48 PM
you erased flash and that holds the ASA operating system, thus as you can see its trying to find an image to boot from but cannot, go to cisco.com and follow the process to reload the OS back onto the ASA
11-28-2007 01:27 PM
sorry I am a new user for ASA.
What I need to do it?
11-28-2007 01:37 PM
You will probably have to tftp the image back onto flash from the rommon prompt.
The workaround section of this doc may help a little.
http://www.cisco.com/en/US/products/ps6120/products_field_notice09186a0080655b8b.shtml
11-28-2007 01:47 PM
hi acomiskey I tried to open this link and it is writen
The page cannot be displayed
11-28-2007 01:50 PM
It works for me
11-28-2007 01:53 PM
Yes you have right . I just open it .
I will see If I can find something to help me.
Thanks
11-30-2007 10:10 AM
I download ASA5520 software in my computer, now
I would like to send it in ASA devices.
Does anybody know Haw Can I do it using TFTP server
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: