cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
558
Views
0
Helpful
1
Replies

ASA 5520 Interface Frequently Reset.

guo6688
Level 1
Level 1

The interface G0/1 of our ASA5520 has a large number of interface resets when issue show interface command. This number increase every several minutes. Other interfaces are ok.

I am very sure there is no cable and patching problems, because I have test cable with another box.

When the interface reset, I can not ping it. After several missing pings, it recovers to normal.

Please anybody knows it is hardware or software problem?

My software version: 7.2(2)33.

Many thanks.

Show inte g0/1

Interface GigabitEthernet0/1 "HBOS_PROD", is up, line protocol is up

Hardware is i82546GB rev03, BW 1000 Mbps

Full-Duplex(Full-duplex), 100 Mbps(100 Mbps)

Description: HBOST Production

MAC address 001b.0c38.cf0b, MTU 1500

IP address 10.50.41.226, subnet mask 255.255.255.224

19555520 packets input, 1885248296 bytes, 0 no buffer

Received 34705 broadcasts, 0 runts, 0 giants

0 input errors, 206 CRC, 0 frame, 0 overrun, 206 ignored, 0 abort

0 L2 decode drops

32664879 packets output, 35252998804 bytes, 0 underruns

0 output errors, 0 collisions, 11334 interface resets

0 late collisions, 0 deferred

0 input reset drops, 19 output reset drops

input queue (curr/max packets): hardware (0/29) software (0/0)

output queue (curr/max packets): hardware (0/7) software (0/0)

1 Reply 1

guo6688
Level 1
Level 1

This is solved. Thank you. It is patch port's problem.

Anyway, thank you for reveiew.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: