Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 5520 stops pinging or tracerouting on outside interface after reboot

we have a brand new ASA 5520 and i have a very basic config on it.. the issue i am having is after i reboot the damn thing, i am able to ping and traceroute through the outside interface for about a minute and then for no apparent reason, i cant hit anything on the outside.. sounds ridiculous but its happening..

Anyone ever see this happen to you or know of a bug or a fix.. config attached below..

interface GigabitEthernet0/2
description Outside
nameif outside
security-level 0
ip address 10.10.10.131 255.255.255.128
!
interface GigabitEthernet0/3
description Inside
nameif inside
security-level 50
ip address 1.1.1.1 255.255.255.0
!

access-list OutsideACL extended permit ip object-group VideoConf host 10.10.10.132
access-list OutsideACL extended permit icmp any any
access-list OutsideACL extended deny ip any any
access-list InsideACL extended permit ip any any

!

global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 10.10.10.132 1.1.1.102 netmask 255.255.255.255
access-group OutsideACL in interface outside
access-group InsideACL in interface inside

!

route outside 0.0.0.0 0.0.0.0 10.10.10.131

!

1 REPLY

Re: ASA 5520 stops pinging or tracerouting on outside interface

Hi

Can you try changing the below statement?

route outside 0.0.0.0 0.0.0.0 10.10.10.131 --- instead of 10.10.10.131 use the next hop ip address.

regds

157
Views
0
Helpful
1
Replies
CreatePlease login to create content