Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

asa 5520 want to allow SMPT from inside to outside???

Can someone please give me an idea how to do this

, I have a program inside that needs to email me reports.inside address 172.16.1.20 to am SMTP on the internet.

3 REPLIES
Cisco Employee

Re: asa 5520 want to allow SMPT from inside to outside???

Hello,

If you do not have an access-list on the inside interface, then it will be

automatically allowed. In order to check if there is an access-list applied

to the inside interface, issue the following command:

sh run access-group

If you see something like "access-group 25

Hope this helps.

Regards,

NT

Community Member

Re: asa 5520 want to allow SMPT from inside to outside???

I only have an access_outside group what would be the entry to m

ake the inside to out access group?

Cisco Employee

Re: asa 5520 want to allow SMPT from inside to outside???

That access_outside group is probably applied on the outside interface.  So, there is no ACL applied on the inside interface.  Like Nagaraja said it will be automatically allowed. No need to do anything.

-KS

194
Views
0
Helpful
3
Replies
CreatePlease to create content