cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1156
Views
0
Helpful
5
Replies

ASA 5540 Configuration 2

pesonagpur
Level 1
Level 1

This is my pix configuration

global (outside) 1 interface

global (inside) 1 interface

nat (inside) 1 access-list 100 0 0

nat (inside) 1 10.0.1.7 255.255.255.255 0 0

nat (inside) 1 10.0.1.8 255.255.255.255 0 0

static (inside,outside) 203.129.203.165 10.0.1.101 netmask 255.255.255.255 0 0

static (inside,outside) 203.129.203.166 10.0.1.98 netmask 255.255.255.255 0 0

static (inside,outside) 203.129.203.162 10.0.1.171 netmask 255.255.255.255 0 0

static (inside,outside) 203.129.203.170 10.0.1.195 netmask 255.255.255.255 0 0

access-group 100 in interface outside

access-group 100 in interface inside

how to configuration this is in my ASA 5540 Firewall....

5 Replies 5

Hi Ram ,

If your ASA has the SW version up to 8.2 ( included ) , the same.

Dan

No ASA sw version is 8.4

What does the access-list 100 contain ? It's applied on interface outside , interface inside , and on the source NAT inside. Is there any reason ?

Dan

It is applied on the interface outside This access list is used to provide internet access to inside user

ram

Hi Ram ,

Here are your NAT rules :

object network IN-HOST-101

host 10.0.1.101

nat (inside,outside) static 203.129.203.165

object network IN-HOST-98

host 10.0.1.98

nat (inside,outside) static 203.129.203.166

object network IN-HOST-171

host 10.0.1.171

nat (inside,outside) static 203.129.203.162

object network IN-HOST-195

host 10.0.1.195

nat (inside,outside) static 203.129.203.170

object network PAT-INSIDE

host 10.0.1.7

host 10.0.1.8

nat (inside,outside) dynamic interface

Regards

Dan

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: