Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

ASA 5550 nat + routing problem

Good Afternoon folks,

In attached, are my network diagram and my "show run" , and my problem is

My server (172.16.3.1) cant ping or access the other server (172.16.4.1). What is wrong??

Before I put the nat rule (nat (inside) 1 172.16.4.0 255.255.255.0) , they just worked fine, but not now.

Both server needs to reach the internet

Thanks

Everyone's tags (4)
1 REPLY
New Member

Re: ASA 5550 nat + routing problem [SOLVED]

with

static (sclan,inside) 172.16.3.1 172.16.3.1 netmask 255.255.255.255 0 0

static (inside,sclan) 172.16.4.1 172.16.4.1 netmask 255.255.255.255 0 0

thanks

940
Views
0
Helpful
1
Replies
CreatePlease to create content