Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 7.0 to ASA 9.0 Migration

Hi,

Sorry if I have posted in the wrong forum. I have an old Asa5505  7.0 with unlimited license and I wanted to replace it with new ASA5505 9.0 10 user license. I copied the running config from the old ASA5505 7.0 and paste it to new ASA5505 9.0. When I powered it on and connected all the network cables, nothing worked and the users were unable to go on the internet. I disconnected the new ASA5505 9.0 from the rack and connected the old one back. So I think I know what I did wrong but just wanted expert opinions on it as well.

Thanks,

3 REPLIES
Bronze

ASA 7.0 to ASA 9.0 Migration

Hello,

Since 7.0 is not compatible with 9.0, you cannot use the same config.

If it is not too long, you can migrate it manually, otherwise you need to upgrade the old ASA to a copatible version (8.3 +)

Regards,

Felipe.

Remember to rate useful posts.

New Member

Re: ASA 7.0 to ASA 9.0 Migration

Would it work after upgrading iOS 8.5 or do I still need unlimited license to support internal hosts?

Sent from Cisco Technical Support iPad App

Bronze

Re: ASA 7.0 to ASA 9.0 Migration

After the migration it should work for 10 users at the time only.

Regards,

Felipe.

Remember to rate useful posts.

130
Views
0
Helpful
3
Replies
CreatePlease login to create content