07-09-2013 05:04 AM - edited 03-11-2019 07:09 PM
For Anyconnect the pool is in the same range as the management interface of firewall. I am able to ping the internal network but not able to access the ASA ssh/https through Anyconnect.
Hardware/Software details:
Cisco Adaptive Security Appliance Software Version 8.4(4)
Device Manager Version 6.4(9)
ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
07-09-2013 05:18 AM
i have already added route-lookup at the end of the nat statement but it is still not working....
nat (inside,outside) source static any any destination static NETWORK_OBJ_172.16.20.0_24 NETWORK_OBJ_172.16.20.0_24 no-proxy-arp route-lookup
07-09-2013 05:35 AM
mistake was that i didnt enable
management-access inside
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide