Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 8.4(4) to ASA 9.1.2

Hi there.

I'm about to upgrade our 5510 software.

Like the title states we're going from 8.4(4) to 9.1.2.

Is there any important changes? Like the NAT from 8.2.5 to 8.4?

Is it just a typical upgrade? Or is there anything i need to specific aware of?

The setup is primary used for l2tp dial in and clientless ssl(we're upgrading the firmware for this reason, to get it up2date)

Thanks!

Regards, Søren.

Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

ASA 8.4(4) to ASA 9.1.2

Hi Soeren,

The upgrade is fairly staright forward, no changes in NAT or acl or any other portion of configuration. Follow the generic procedure to upgrade the ASA's:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml

In case, devices are in failover:

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/admin_swconfig.html#wp1380398

Always check out the release notes for the version you want to upgrade to:

http://www.cisco.com/en/US/docs/security/asa/asa91/release/notes/asarn91.html

HTH.

-

Regards,

Sourav Kakkar

3 REPLIES
Cisco Employee

ASA 8.4(4) to ASA 9.1.2

Hi Soeren,

The upgrade is fairly staright forward, no changes in NAT or acl or any other portion of configuration. Follow the generic procedure to upgrade the ASA's:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml

In case, devices are in failover:

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/admin_swconfig.html#wp1380398

Always check out the release notes for the version you want to upgrade to:

http://www.cisco.com/en/US/docs/security/asa/asa91/release/notes/asarn91.html

HTH.

-

Regards,

Sourav Kakkar

New Member

ASA 8.4(4) to ASA 9.1.2

The upgrade went smooth!

Thanks for your reply!

Cisco Employee

ASA 8.4(4) to ASA 9.1.2

Awesome! :-)

1873
Views
0
Helpful
3
Replies
CreatePlease to create content