I believe this is the configuration you are looking for.
nat (real interface,mapped interface) static
So for instance if I have a web server with internal IP 10.0.0.1, and from the outside it's viewed as port 80 but on the inside
the server is listening on port 85, the following configuration would need to be applied.
object network web_server
nat (dmz,outside) static 126.96.36.199 85 80
In this configuration the DMZ is my real interface and OUTSIDE is my mapped interface. 188.8.131.52 is my public ip address which will be visible on the outside(internet) and port 85(the first port listed) if the real port that the web server is listening on.
The second port of (80) is the mapped port, which is the port internet users will see.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...