05-17-2014 01:24 PM - edited 03-11-2019 09:12 PM
Hi Everyone,
For learning purposes at my home lab i have 2 ASA.
They have active/standby feature.
Currently single ASA has uplink connection to ISP modem.
This ASA has 2 interfaces going to 2 different switches.
Need to know if i configure second ASA will it work fine as active/standby even though i have single connection to ISP?
Regards
MAhesh
Solved! Go to Solution.
05-18-2014 06:57 PM
yes you can... assuming that you don't have spare IP address on your outside interface that connects to the ISP, you can configure your ASA internal interfaces with failover, and disable failover on the outside interface.
05-18-2014 06:57 PM
yes you can... assuming that you don't have spare IP address on your outside interface that connects to the ISP, you can configure your ASA internal interfaces with failover, and disable failover on the outside interface.
05-18-2014 07:03 PM
Hi Jennifer,
Thanks for reply back.
I will test this failover in coming days.
Best regards
Mahesh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: