Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ASA active/standby with single link to ISP

 

Hi Everyone,

 

For learning purposes at my home lab i have 2 ASA.

They have active/standby feature.

Currently single ASA has uplink connection to ISP modem.

This ASA has 2 interfaces going to 2 different switches.

Need to know if i configure second ASA will it work fine as active/standby even though i have single connection to ISP?

 

Regards

MAhesh

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

yes you can... assuming that

yes you can... assuming that you don't have spare IP address on your outside interface that connects to the ISP, you can configure your ASA internal interfaces with failover, and disable failover on the outside interface.

2 REPLIES
Cisco Employee

yes you can... assuming that

yes you can... assuming that you don't have spare IP address on your outside interface that connects to the ISP, you can configure your ASA internal interfaces with failover, and disable failover on the outside interface.

New Member

Hi Jennifer,Thanks for reply

Hi Jennifer,

Thanks for reply back.

I will test this failover in coming days.

Best regards

Mahesh

57
Views
0
Helpful
2
Replies
CreatePlease to create content