ASA and NAT question

[Branimir Turk]

Hi everybody,

I have an ASA firewall with DMZ and Outside interface. On DMZ interface i have two servers connected (172.16.0.1/24 and 172.16.0.2/24). On Outside interface i am preforming NAT of these two addresses to public addresses (for example; 172.16.0.1 to 217.16.0.1 and 172.16.0.2 to 217.16.0.2).

My question is there any way to enable communication of servers via public addresses? For example that server 172.16.0.1 reaches other server via 217.0.0.2 address?

Thank you.

[a.alekseev]

I do not know other way

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968c8.shtml

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml