Accept connections using SSLv2, SSLv3 or TLSv1 and negotiate to SSLv3 or TLSv1 Start connections using SSLv3 and negotiate to SSLv3 or TLSv1 Enabled cipher order: des-sha1 Disabled ciphers: 3des-sha1 rc4-md5 rc4-sha1 aes128-sha1 aes256-sha1 dhe-aes128-sha1 dhe-aes256-sha1 null-sha1 No SSL trust-points configured Certificate authentication is not enabled
Cisco Adaptive Security Appliance Software Version 8.4(6) Device Manager Version 7.0(2)
Compiled on Fri 26-Apr-13 09:00 by builders System image file is "disk0:/asa846-k8.bin" Config file at boot was "startup-config"
mtcdcasa up 14 mins 18 secs
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz Internal ATA Compact Flash, 128MB BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Serial Number: JMX144541LQ Running Permanent Activation Key: 0xa01b547d 0xd4e262dd 0xdc031d40 0xb00010ec 0x48291eba Configuration register is 0x1 Configuration has not been modified since last system restart.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...