Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA Configuration Question

This may be an easy one for you guys, I just inherited an ASA from a purchased company. I have to assign a public IP to a host for externam access on a specific port.

Can anyone tell me what the specific syntax would be on a ASA? (Scenario below)

allow 65.x.x.x to host 172.x.x.x on port (non descript) 5711

I would really appreciate anyone's with this. The ASA is a 5520.

Thank you again.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

ASA Configuration Question

Hello Matthew,

Witch version are you running, lets say 8.3 or higher:

object network Outside_IP

host 65.2.2.2

object network Inside_IP

host 172.16.2.3

object service 5711

Service tcp source eq 5711

nat (inside,outside) source static Inside_IP Outside_IP service 5711 5711

access-list outside_in permit tcp any host 172.16.2.3 eq 5711

access-group outside_in in interface outside

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
2 REPLIES

ASA Configuration Question

Hello Matthew,

Witch version are you running, lets say 8.3 or higher:

object network Outside_IP

host 65.2.2.2

object network Inside_IP

host 172.16.2.3

object service 5711

Service tcp source eq 5711

nat (inside,outside) source static Inside_IP Outside_IP service 5711 5711

access-list outside_in permit tcp any host 172.16.2.3 eq 5711

access-group outside_in in interface outside

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
New Member

ASA Configuration Question

Thank you very much JCarvaja. This will help a great deal!!!! Yes the version I am running i s8.3. Thanks again sir!

217
Views
0
Helpful
2
Replies
CreatePlease login to create content