Can the ASA DHCP server be configured to give out addresses to clients that are in a different subnet from that which is configured on the interface?
Connected to my inside interface I have a layer three switch that has two VLAN's configured on it. One VLAN is on the same subnet as the inside interface. That network is 10.10.1.x with the inside interface being 10.10.1.1. The other VLAN is 192.168.1.x and routes on the L3 switch. Currently the users in the 10.10.1.x network get DHCP addresses from a seperate DHCP server. I would like the users in the 192.168.1.x network to get their addresses from the ASA.
If I configured the ASA as follows with this work even though the pool is not in the same subnet as the inside interface?
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...