I have copied all files from Disk0: to Disk1 in an ASA5520, my interntion being to configure the device to boot from Disk1 and the upgrade the image from 7.2 to 8.03 and asdm from 5.2 to 6.1.
When I look at the contents of the disks from ASDM file management - ASDM-522 on Disk0: has a status of ASDM image. on Disk1: the image is there but the status is blank - would this affect the asdm ability to run when I boot from Disk1 ?
many thanks
Keith
