I have an ASA 5550 running asa913-k8.bin. I'm trying to configure 2 of the ASA interfaces in an etherchannel to connect to a VSS switch.
This works fine when I'm using the first 4 RJ45 interfaces on the ASA (Gi0/0 to Gi0/3). When I try and add any of the RJ45/SFP interfaces (Gi1/0 to Gi1/3)to an etherchannel, the "channel-group" command is unavailable.
Is it possible to add one of the SFP module interfaces on a 5550 into an etherchannel - i;ve tried specifying the correct media-type but the channel-group command still isn't available.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...