Hi, two ASA with 7.2.4 and configured stateful failover...should it be regular behavior to drop some tcp connection? I repeat, stateful failover is configured on the same interface as LAN failover, but is it ok that some percent of tcp connection is dropped or it is 100 percent stateful?
I belive this depends on various parameters, for instance is the platform able to handle the load? if you have a small box and your network is really high and loaded I think it might be normal to drop some state information. It also has to do with the fact that the state link is not dedicated. Is this for http connections?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...