cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
415
Views
0
Helpful
3
Replies

ASA/FWSM 7.2 VLSM

jwjorgensen
Level 4
Level 4

Do you guys know of any reason why I would be getting ip address conflicts when trying to set up the following scenario:

outside-x.x.x.34/30

inside1-x.x.x.37/29

inside2-x.x.x.45/29

It would appear as if the firewall is not handling VLSM very well.

any thoughts...

3 Replies 3

Jon Marshall
Hall of Fame
Hall of Fame

Hi

It's not the FWSM it's the subnet ranges you are using.

/29 = 248.

256 - 248 = 8

So your /29 networks go up in 8

x.x.x.8

x.x.x.16

x.x.x.24

x.x.x.32

But you have used x.x.x.32 with a /30 subnet mask so you have an overlapping address range.

You could do

inside1 x.x.x.41/29

inside2 x.x.x.49/29

HTH

Jon

Yeah......

I figured that out a little bit after I posted the question. I am trying to look up the operator error on the bug toolkit.

:-)

You won't find it - i've been looking for the last couple of years !!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: