Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA >8.3, names and acls ?

Just building our new ASA from scratch and have ran into a small issue regarding names.

On our old PIX most of my ACLs have hostnames that map to IP's via the names table.

I pasted the names table over to the ASA in hopes that I would then be able to simply paste over the ACL's that reference these names

but no luck.


Being new to the 8.3 space, am I no longer able to do this

ex

name 192.168.10.5 testserver

access-list outside_allow extended permit ip any host testserver

Cheers


Dave                  

Everyone's tags (3)
1 REPLY

ASA >8.3, names and acls ?

Hello,

That is correct from 8.3 we start using network objects instead of names.

So here is my recomendation:

1- Go to 8.2 first and build the names and then upgrade to 8.3 so the names will be translated automatically to an object newtork

2-Start the object network configuration from 8.3 manually , then you just add them to the ACL's and nat stuff.

Regards,

Rate all the helpful posts

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
208
Views
0
Helpful
1
Replies