Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASA issue

Hi all

I have firewall with three zones namely inside,outside and DMZ.On the DMZ we have webserver and static NAT is given on the firewall.From outside i can access the webserver using public IP.But from Inside i cannot access on Public IPs or any of Public IPs on our network.Is there any way to access our public IP from inside?

5 REPLIES

Re: ASA issue

You need configure a static nat on the inside interface for the DMZ server IP.

HTH>

Community Member

Re: ASA issue

Thanks Andrew for the quick response can u please give one example

Re: ASA issue

I would try something like:-

static (DMZ,inside) <> <> netmask 255.255.255.255

HTH>

Community Member

Re: ASA issue

Thanks Andrew.but which internal Ip i should give because the server is in DMZ

Re: ASA issue

OK - let me explain:-

static (DMZ,inside) <> <> netmask 255.255.255.255

(DMZ = Source Interface, inside = Destination interface) <> <>

130
Views
10
Helpful
5
Replies
CreatePlease to create content