Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA LAN Based Failover

Hi,

I am using ASA 5540 and trying to implement LAN Based Active/Standby Failover using Management Interface. It seems that failover is possible but not the Stateful failover. Can anybody confirm me... about it that using Mngt interface I can not do Stateful Failover??

Thanks in Advance.

Adnan

2 REPLIES
Cisco Employee

Re: ASA LAN Based Failover

You should be able to configure stateful failover with the ASA5540s. This is not supported only in the ASA5505s.

Pls. follow this link for sample config.

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/failover.html#wp1064158

Cisco Employee

Re: ASA LAN Based Failover

Hi Adnan,

To use the management interface for non-management traffic, you need to

remove the command 'management-only' from the interface configuration.

At that point you should be able to use that interface like any other

hth

Stefan

132
Views
0
Helpful
2
Replies