cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
831
Views
10
Helpful
7
Replies

ASA logging issue

phuoctrung
Level 1
Level 1

Hi all

I can not view any log on ASA version 8.4.7 via ASDM, console, ssh...ASA 5520 is running multicontext mode

anyone have the same issue.

logging enable

logging timestamp

logging buffer-size 81920

logging asdm-buffer-size 512

logging console notifications

logging monitor informational

logging buffered informational

logging trap notifications

logging history warnings

logging asdm informational

logging host outside xxxx

logging host outside xxxx

logging permit-hostdown

logging message 113008 level notifications

logging message 113004 level notifications

logging message 611101 level notifications

logging message 605005 level notifications

7 Replies 7

Julio Carvajal
VIP Alumni
VIP Alumni

Hello,

Did this work on a previous version

For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com

Any question contact me at jcarvaja@laguiadelnetworking.com

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

In mutiple context mode and ASA version 8.4.2, I can view message log via ASDM, ssh, console...but ASA version 8.4.7 is not. I wonder, Is this a bug?

Hmm,

If this was working with the exact same configuration then it seems like a bug.

Have you tried to look for the logs on all of the contexts?

For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com

Any question contact me at jcarvaja@laguiadelnetworking.com

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

Jatin Katyal
Cisco Employee
Cisco Employee

The below listed INTERNAL defect is matching most of the symptoms you are describing here.

CSCuj16320    ASA 8.4.7 Multi Context TFW not generating any syslog data

Symptom:

ASA running 8.4.7 may not produce Syslog data at all.

Conditions:

ASA running 8.4.7

Has been observed on Multi context Transparent FW mode.

Workaround:

none

Further Problem Description:

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

Hi.

Firewall is ASA version 8.4.7 and Context mode: Multiple and Firewall mode: Routed

so yes the defect specically talking about ASA version 8.4.7 Multiple context, transparent mode and you're runnning it in routed mode. Looking at your problem description, it seems the problem is with transparent and routed both modes because with ASA 8.4.2 it works fine irrespective of firewall mode.

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

I would also suggest you to open TAC and let Cisco know about this issue.

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: