Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA logging to MARS

We have a MARS appliance and we have syslog setup on our ASA to send to it. For hosts that we have a name created in the ASA (Using Names command) it puts the name in the syslog message. Is there a way to have the syslog send the IP address instead? We cannot tune the MARS appliance because the IP address ends up being 0.0.0.0

Thanks for the help,

Brian

2 REPLIES
Gold

Re: ASA logging to MARS

enter the following command in the ASA:

no names

this will also disable all 'names' as they appear in the firewall config though. It won't delete any configured names. You can re-enter 'names' and disable as desired. I don't know of any other way though.

New Member

Re: ASA logging to MARS

I was hoping for a different approach but thanks for the help.

113
Views
0
Helpful
2
Replies