04-13-2007 12:29 PM - edited 03-11-2019 03:00 AM
HI ALL,
please i want to configure my pix software v7.1 as multiple context , one "admin" and the other "test" context and allocate the ethernet0 nad 1 for the admin context and interface ethernet2 and 3 to test context.
i need configuration.
04-13-2007 04:57 PM
Get stated here:
http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_1/conf_gd/contexts.htm
config example:
mode multiple
wr mem
reload
chan context system
admin-context admin
context admin
allocate-interface gigabitethernet 0/0.3
allocate-interface gigabitethernet 0/1.4
config-url disk0://admin.cfg
exit
context cutomersA
description This is the context for customer A
allocate-interface gigabitethernet 0/0.3
allocate-interface gigabitethernet 0/1.5
config-url disk0://contexta.cfg
wr mem
# configure your contexts:
chan cont cutomersA
config example:
http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_1/conf_gd/examples.htm
sincerely,
Patrick
09-17-2007 07:54 PM
Hello Patrick,
I'm very very happy, because I found post from you. I have searched in all cisco website and I did not find how to configure a context.
Thank you so much.....
Cassio Gomes
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide