Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA not accepting enable (EXEC) Mode Password

Hello there!

I have a ASA5540. I am facing a problem with it accepting the enable(exec) mode password. All the other devices are accepting the password except ASA. I do have configured the ASA with following commands for ACS:

aaa-server abc protocol tacacs+

aaa-server abc host 172.16.x.x

key cisco

aaa authentication ssh console tacacs+ LOCAL

aaa authentication enable console tacacs+ LOCAL

The ASA IOS version is 7.22 and ASDM version is 5.22.

I do have TACACS+ Enable Password enabled on ACS.

This is what the output looks like:

User Access Verification

Username: abc

Password: **********

Type help or '?' for a list of available commands.

CISCOASA> en

Password: **********

Password: **********

Password: **********

Access denied.

CISCOASA>

Kindly note that All the other devices are accepting the password except ASA

1 REPLY

Re: ASA not accepting enable (EXEC) Mode Password

What is the failed report in ACS telling you?

I think you need to create a user enable_15 and then assign it the password.

Regards

Farrukh

290
Views
0
Helpful
1
Replies