Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA not passing LPD

I having trouble configuring my first ASA I need to pass lpd traffic and the implicit rule is blocking me I attached my config. I am not sure if the problem is the access list or my nat.

2 REPLIES
New Member

Re: ASA not passing LPD

do the following :

access-list outside_access_in extended permit tcp any host 192.168.9.9 eq lpd

static (inside,outside) 192.168.9.9 10.1.24.9 netmask 255.255.255.255

Your static is the other way round.

Raman

New Member

Re: ASA not passing LPD

Thank you for the information. I discovered the problem on Friday and was able to correct it. I question it does help to step away from a projectfor a while then come back with a fresh look at the code.

315
Views
0
Helpful
2
Replies