Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

ASA per user bandwidth capping

I have a 20/20 MB circuit and an ASA 5510 and I am able to setup policing were the interace gets 512k down and 128k up so when I conduct a speed test with one user I get 512k and 128k and when I conduct a speed test with two users each gets 256k and 64k.  Here is my policing config for this...

access-list XX permit tcp any any

class-map XX

match access-list XX

policy-map XX

class XX

police input 512000

police output 128000

service-policy XX interface outside

q

wr mem

What I want to happen is that each user gets 512k and 128k until a saturation point is hit and then I want the ASA to slow all users down equally. 

Any ideas

1 REPLY
Cisco Employee

ASA per user bandwidth capping

Hello,

Can you try to put both hosts to download the same file and see the tranfer rates? Then try with just one and see if it increments.

Truth to be told, I dont really rely on those Online speed tests sites.

Mike

Mike
748
Views
0
Helpful
1
Replies
CreatePlease to create content