I wonder if anyone can explain why the following occurs and if there is a way around it.
Lets say i have a site with 2 outgoing connections. One is an IPSec lan-2-lan connection via an ASA\PIX firewall to 10.0.1.0/24. The other is an internal private WAN connection to every other 10.0.0.0/8 address.
If i specify a static route on the firewall directing 10.0.0.0/8 to our internal private WAN then this "breaks" the VPN to 10.0.1.0/24. Clearly this is because the firewall thinks 10.0.1.0/24 is now available by the internal private WAN. Even though it has an IPSec VPN configured for 10.0.1.0/24.
This means that i would need to add routes on the firewall for every 10.0.0.0/8 address with the exception of 10.0.1.0/24. This is quite "fiddly" to say the least.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...