ASA publishing

[nika.katsitadze]

hello

i have ASA firewall and three seperate web servers. and i have 1 public ip address. i need to publish all this web servers with this ip address.  how can i make asa to nat packets according to the web addresses? 

Thanks

[Lee Valentin]

you're going to do 2 things

configure port forwarding rule with different ports

configure access lists to open the ports on the interface

externally, users will need to navigate to the http://publicipaddress:port

good luck

[ajay chauhan]

Thats correct port forwarding will be the solution but the configuration depends upon ASA version you are using.

Thanks

Ajay

[nika.katsitadze]

i dont want to change ports. i want all the servers to use 80 port.

for example i have three web servers with three different web pages on them. www.1.com  www.2.com and www.3.com

is it possoble for asa to inspect which web page client connects to and direct traffic to that server ? 

every server must use 80 port.

thanks

[cadet alain · Accepted solution]

Hi,

no this is not possible, you'll have to use different external ports for each server  otherwise you'll have to ask for 2 more static IP addresses from provider.

Regards.

Alain

[nika.katsitadze]

Thank you