Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA publishing

hello

i have ASA firewall and three seperate web servers. and i have 1 public ip address. i need to publish all this web servers with this ip address.  how can i make asa to nat packets according to the web addresses? 

Thanks

  • Firewalling
1 ACCEPTED SOLUTION

Accepted Solutions
Purple

ASA publishing

Hi,

no this is not possible, you'll have to use different external ports for each server  otherwise you'll have to ask for 2 more static IP addresses from provider.

Regards.

Alain

Don't forget to rate helpful posts.
5 REPLIES
New Member

ASA publishing

you're going to do 2 things

configure port forwarding rule with different ports

configure access lists to open the ports on the interface

externally, users will need to navigate to the http://publicipaddress:port

good luck

ASA publishing

Thats correct port forwarding will be the solution but the configuration depends upon ASA version you are using.

Thanks

Ajay

New Member

ASA publishing

i dont want to change ports. i want all the servers to use 80 port.

for example i have three web servers with three different web pages on them. www.1.com  www.2.com and www.3.com

is it possoble for asa to inspect which web page client connects to and direct traffic to that server ? 

every server must use 80 port.

thanks

Purple

ASA publishing

Hi,

no this is not possible, you'll have to use different external ports for each server  otherwise you'll have to ask for 2 more static IP addresses from provider.

Regards.

Alain

Don't forget to rate helpful posts.
New Member

ASA publishing

Thank you

539
Views
0
Helpful
5
Replies