Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA Security Context and RIP Routing

I`m trying to verify some information but can find nothing of use on the cisco.com website or google. So, I turn to you guys/gals.

An associate in another business unit has purchased a few ASA 5580's and was told if he were to run multiple security contexts, he would not be able to utilize RIP for routing. Is this true or false. If this is true, can someone point me to a link where it says this is not possible. If it is false, I would really appreciate if there were a link somewhere on cisco's site where it stated this is possible.

3 REPLIES
Hall of Fame Super Blue

Re: ASA Security Context and RIP Routing

You cannot run any dynamic routing protocol if you are running multiple contexts. Excerpt from ASA 8.x configuration guide

==============================================

This section describes how to configure static and default routes on the security appliance.

Multiple context mode does not support dynamic routing, so you must use static routes for any networks to which the security appliance is not directly connected; for example, when there is a router between a network and the security appliance.

==============================================

Full link -

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ip.html#wp1118237

Jon

New Member

Re: ASA Security Context and RIP Routing

thank you

Cisco Employee

Re: ASA Security Context and RIP Routing

198
Views
0
Helpful
3
Replies
CreatePlease to create content