Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA SNMP Trap Behaviour

Anyone can help to explain the SNMP trap behaviour of ASA when there is interface failure or chassis failure occurred.

For example,

1)When one of the interface failure,firewall failover occurred, which firewall will sent out the SNMP traps, the failed "primary" firewall or the secondary firewall ??

2)When there is interface failure occurred on the failover interface which interconnect between the firewalls, what will be the status of the firewalls and which firewall will sent out SNMP traps ??

Thanks..

1 REPLY
Bronze

Re: ASA SNMP Trap Behaviour

You can monitor system events on the PIX using Simple Network Management Protocol (SNMP). In order to receive SNMP syslog traps for failover, configure the SNMP agent to send SNMP traps to SNMP management stations, define a syslog host, and compile the Cisco syslog MIB into your SNMP management station.

This explains the SNMP traps on ASA.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml

683
Views
0
Helpful
1
Replies
CreatePlease to create content