Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA SSH to PIX

Hi All,

I have site to site VPN between ASA and PIX. I want to connect to PIX by ssh or telnet through ASA. I know we can do this in router with "telnet" command. is there any way to connect to PIX through ASA by SSH or telnet?

thanks for any suggestion.

Alex

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: ASA SSH to PIX

no. the asa and pix do not have either a telnet or ssh client.

4 REPLIES
Cisco Employee

Re: ASA SSH to PIX

topology:

Host-1---PIX---Tunnel----ASA---Host-2

Once you enable

management-access inside on the ASA

then you can use Host-1 to telnet to the ASA on its inside interface IP address and vice versa.

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/m.html#wp1987122

Does this help?

New Member

Re: ASA SSH to PIX

Thanks for the reply,

how about connect to PIX by ASA command line?

the problem is PIX is only allow SSH access from inside interface not outside. I don't have access to the inside of PIX. I want to connect to PIX by SSH to the PIX inside IP address in the ASA command line.

also I don't have access to any host inside ASA.

is this possible?

thanks

Alex

Gold

Re: ASA SSH to PIX

no. the asa and pix do not have either a telnet or ssh client.

Cisco Employee

Re: ASA SSH to PIX

For security reasons, it is by design that you cannot telnet or ssh from the firewall.

149
Views
0
Helpful
4
Replies