I'm running into a issue with traffic. I have a backup location with internet and connected via MPLS. I need traffic to route to the main location. Do I only add default route to the asa to point to the main ASA network? Or do I add a static nat to the internal network?
Will the secondary internet connection work if a secondary ASA is in a different location? The link reported if the connection is directly connected to the firewall. I'm trying to make sure the internet traffic from the secondary ASA in the different location is pointing back to my main office. So if I added the static route of the main ASA in the secondary ASA it should route all traffic to the main ASA. I have an MPLS going to the secondary site.
! interface Ethernet0/0 speed 100 duplex full nameif t1 security-level 0 ip address 126.96.36.199 255.255.255.224 ! interface Ethernet0/1 speed 100 duplex full nameif inetdmz security-level 25 ip address 172.16.1.1 255.255.255.0 ! interface Ethernet0/2 speed 100 duplex full nameif inside security-level 100 ip address 10.0.254.252 255.255.255.0
Secondary ASA (Different location)
interface GigabitEthernet0/0 speed 1000 duplex full nameif t1 security-level 0 ip address 188.8.131.52 255.255.255.224 ! interface GigabitEthernet0/1 speed 1000 duplex full nameif inside security-level 100 ip address 10.1.250.252 255.255.255.0 ! interface GigabitEthernet0/2 speed 1000 duplex full nameif inetdmz security-level 25 ip address 184.108.40.206 255.255.255.0
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...