Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA view maintenance release

We have a Cisco ASA 5520 and I need to view the maintenance release version. When I do a show version I see 8.2(5) and when I view the file in flash I don't see details of the maintenance number.

I'm checking our ASA due to the bulletin below where its mentioned to have 8.2(5.47) or 8.2(5.48) but I can't find the .47 or .48 on the ASA.

Thanks for any help.
Jeff

http://www.cisco.com/c/en/us/support/docs/csa/cisco-sa-20140409-asa.html#@ID

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

The maintenance releases

The maintenance releases (sometimes referred to as interim builds) are usually not published on the download portal. If you have a documented need for one (as is the case with this SA), the TAC can give you access to download the necessary build.

Once you've reloaded with that version as your boot image, your "show version" will then show it as running.

2 REPLIES
Hall of Fame Super Silver

The maintenance releases

The maintenance releases (sometimes referred to as interim builds) are usually not published on the download portal. If you have a documented need for one (as is the case with this SA), the TAC can give you access to download the necessary build.

Once you've reloaded with that version as your boot image, your "show version" will then show it as running.

New Member

Thank you for the reply.Jeff

Thank you for the reply.

Jeff

58
Views
0
Helpful
2
Replies