cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1127
Views
0
Helpful
5
Replies

ASA working fine but no console Access

g-oliveira
Level 1
Level 1

Hi all

I have an asa 5585x cluster.

I get ssh access but no console access on the standby unit.

On the active unit, when I try console access, ASA ask for a password.

I have tried all the one that I have configured, but without success.

Any idea ?

5 Replies 5

Richard Burts
Hall of Fame
Hall of Fame

It might be good to start investigating this by posting the part of the configuration that deals with aaa authentication. If we see this we may get some idea of what is causing the issue.

HTH

Rick

HTH

Rick

Marvin Rhoads
Hall of Fame
Hall of Fame

I'm with Rick on this one.

Please provide output from "show run | i console". We would be looking for (among other things) a line something like "aaa authentication serial console"....

Hi all

I didn't refer thar i'm on a multy context environment. Heare is the concole config

FW03/act/admin# sh run | i console

aaa authentication enable console TACACS+F1 LOCAL

aaa authentication http console TACACS+F1 LOCAL

aaa authentication ssh console TACACS+F1 LOCAL

aaa authentication serial console TACACS+F1 LOCAL

aaa accounting enable console TACACS+F1

aaa accounting ssh console TACACS+F1

FW03/act/admin#

FW03/act/admin# ch c system

FW03/act# sh run | i console

console timeout 10

FW03/act#

Thanks for the support

Hi All

     Reboot on both nodes, and problem solved.

     Thanks for the support.

Thanks for posting back to the thread to tell us that a reboot fixed the problem. It is good to know that it is working now. It would be nice to know what the original problem was.

HTH

Rick

HTH

Rick
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: