Hi
I am new to these devices and I am struggling to get the device configured and would very much welcome some help!
For some reason I cannot give external users access to the web server in the dmz.
The syslog is showing a block request everytime. At the moment I only have a single usable public ip address 82.171.212.214 which I am
setting to the outside interface and then attempting to use PAT against this.
Here is the config I have been using:
hostname thallo
domain-name jam.co.uk
interface gigabitethernet 0/0
nameif outside
security-level 0
ip address 82.171.212.214 255.255.255.252
no shutdown
interface gigabitethernet 0/1
nameif inside
security-level 100
ip address 10.6.1.250 255.255.255.0
no shutdown
interface gigabitethernet 0/2
nameif dmz
security-level 50
ip address 192.168.100.1 255.255.255.0
no shutdown
route outside 0.0.0.0 0.0.0.0 82.171.212.213 1
nat (inside) 1 10.6.1.0 255.255.255.0
nat (dmz) 1 192.168.100.0 255.255.255.0
global (outside) 1 interface
access-list Services extended permit tcp any host 82.171.212.214 eq 80
access-list Services extended permit tcp any host 82.171.212.214 eq 25
access-group Services in interface outside
static (dmz,outside) tcp 82.171.212.214 25 192.168.100.10 25 netmask 255.255.255.255
static (dmz,outside) tcp 82.171.212.214 80 192.168.100.11 80 netmask 255.255.255.255
As I said, any help would be welcome.
Regards
Gary
