cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
494
Views
0
Helpful
1
Replies

ASA5505 & VPN clients

scott.bridges
Level 1
Level 1

I have an ASA5505 and a PIX515.

Right now clients with Cisco VPN software can authenticate to the PIX and access local servers.

I am doing this via the "vpngroup bob address-pool vpnusers" and so on.

Can anyone provide a simple sample config, or link, to instructions to setup the ASA this way?  So clients using Cisco VPN will be able to dial into the ASA and access local servers?

Any tips & links much appreciated.

(i went through the vpn wizard on the ASA gui, but i'd rather do it via CLI so i can see what is going on)

[also, is there a Cisco VPN client for Windows 7 x64?)

1 Reply 1

Jennifer Halim
Cisco Employee
Cisco Employee

Here is a sample configuration on ASA to configure ipsec remote access vpn client:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml

Split tunnel sample configuration:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

Windows 7 64-bit is supported on VPN Client version 5.0.07.0290 (released last week).

Hope that helps.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: