Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA5505 & VPN clients

I have an ASA5505 and a PIX515.

Right now clients with Cisco VPN software can authenticate to the PIX and access local servers.

I am doing this via the "vpngroup bob address-pool vpnusers" and so on.

Can anyone provide a simple sample config, or link, to instructions to setup the ASA this way?  So clients using Cisco VPN will be able to dial into the ASA and access local servers?

Any tips & links much appreciated.

(i went through the vpn wizard on the ASA gui, but i'd rather do it via CLI so i can see what is going on)

[also, is there a Cisco VPN client for Windows 7 x64?)

1 REPLY
Cisco Employee

Re: ASA5505 & VPN clients

Here is a sample configuration on ASA to configure ipsec remote access vpn client:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml

Split tunnel sample configuration:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

Windows 7 64-bit is supported on VPN Client version 5.0.07.0290 (released last week).

Hope that helps.

375
Views
0
Helpful
1
Replies
CreatePlease login to create content