04-08-2010 06:11 AM - edited 03-11-2019 10:30 AM
Hey guys.
is it possible to limit bandwith from lan interface to WAN interface ? We have 50 mbit internet connection, but we want to dedicate 5 MBit to LAN and 45 MBit to DMZ.
Best regards Mikkel
Solved! Go to Solution.
04-08-2010 06:26 AM
you could use rate limiting using qos policies on the ASA.
See http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml
04-08-2010 10:30 AM
An example config for policing can also be found here
https://supportforums.cisco.com/docs/DOC-1230#Traffic_Policing_with_Prioritization
I hope it helps.
PK
04-08-2010 06:26 AM
you could use rate limiting using qos policies on the ASA.
See http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml
04-08-2010 10:30 AM
An example config for policing can also be found here
https://supportforums.cisco.com/docs/DOC-1230#Traffic_Policing_with_Prioritization
I hope it helps.
PK
04-09-2010 06:17 AM
Thanks guys, i will try it out!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide