Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

ASA5510 L-ASA5510-SEC-PL

In our company we have ASA5510-SEC-BUN-K9. Is it possible in any way to configure "switchport mode trunk" and "interface vlan" commands adding a modul (SSM-4GE) or a licence (L-ASA5510-SEC-PL) to ASA or ...

Everyone's tags (1)
4 REPLIES
Cisco Employee

Re: ASA5510 L-ASA5510-SEC-PL

You can configure trunk port on any of the ASA 5510 interfaces and configure sub-interfaces + assigned the vlan in the sub-interface.

Here is the URL for your reference:

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/intrface.html#wp1044006

Hope that helps.

New Member

Re: ASA5510 L-ASA5510-SEC-PL

Yes we know but we need to configure "switchport mode trunk" command on physical interface because of design of our network.

Cisco Employee

Re: ASA5510 L-ASA5510-SEC-PL

You don't have to and can't configure the command "switchport mode trunk" on the ASA. ASA only supports dot1q trunk, and once you configure sub-interfaces on that physical interface, the physical interface automatically becomes a trunk port.

New Member

Re: ASA5510 L-ASA5510-SEC-PL

Thank you for prompt response.

2713
Views
0
Helpful
4
Replies
CreatePlease to create content