06-10-2007 09:18 PM - edited 03-11-2019 03:27 AM
Hello,
I followed technical note (http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtml) to configure remote Radius authentication, but got following error message when try to verify the Radius from firewall:
"ERROR: Authentication Server not responding: No error"
any suggestion?
Many thanks~!
06-10-2007 10:44 PM
Are you able to ping the server from the PIX ?
are you able to verify the ports on the radius server ports 1812,1645
06-10-2007 10:53 PM
also make sure the key on both sides are same. In case you are using a self created network devices group in ACS, make sure you are using the group key in NAS and not the device key. Group key will take precedence.
06-10-2007 11:14 PM
i can ping that radius server from ASA, how can I verify the posts from radius?
i can sure that the shared secret key is same as the key in aaa- server firewall.
06-10-2007 11:37 PM
Can your try test aaa command????
test aaa-server authentication server_name
M.
06-10-2007 11:40 PM
yes, i did tried test aaa command, but got the above error message in ASA.
06-11-2007 07:24 AM
Try debug aaa autehntication
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: